Design speed is the rate of travel for which the physical characteristics of a roadway are designed. The design speed for a given roadway plays a large role in determining the scale and design of roadway characteristics. For example, if a design speed of 35 mph is chosen for a given roadway, all aspects of its design, such as roadway curvature, lane width and intersection elements will safely accommodate vehicles traveling at 35 mph. Roadside design elements vary greatly with design speed, as fixed objects along the streets present a greater substantive safety risk at higher speeds.
Before discussing design speed, it may be useful to introduce and explain a few related topics:
Designers and engineers often choose a design speed that is higher than the posted/target speed, which encourages vehicles to travel at speeds higher than the target speed, especially along lower speed corridors. A facility's design speed and target speed should be equal, to keep vehicular speeds at or below the desired target speed. All elements of the streetscape should be designed to support the target speed for the corridor.
In a multi-modal environment with significant pedestrian presence, it is essential to provide adequate vehicular stopping sight distance and intersection sight distance. It is good practice to use a relatively low design speed (e.g. 30 mph) but provide the equivalent of 40 mph of sight distance.
Functional classification is traditionally used to determine the target speed for a given arterial street. Although roadway planners and designers should consider functional class when selecting the facility's posted speed, the characteristics of each individual place should be the primary consideration used in choosing a target speed. A keen awareness of an area's unique characteristics will prevent the misapplication of broad standards that may be inappropriate for the place.
Design Speed for Civic and Educational Thoroughfares
Characteristics that influence the choice of design speed in these place types:
"Safe Routes to School" is a national task force created by the USDOT to encourage students to walk and bicycle to school by providing routes that are safe, efficient, and attractive. From FHWA: "Once upon a time in our cities, walking and bicycling to school was a part of everyday life. In 1969, about half of all students nationally walked or bicycled to school. Today, however, less than 15 percent of all school trips are made by walking or bicycling, one-quarter are made on a school bus, and over half of all children arrive at school in private automobiles." Design speed, in particular low design speed,is an integral element in the development of great civic and educational thoroughfares that support "Safe Routes to School".
Select the lowest practical target speed. As speed increases, so does the safety risk for pedestrians and bicyclists. Studies on this subject have correlated higher speeds with higher fatality rates for pedestrians when struck by vehicles. For place types such as these that have higher pedestrian and bicycle activity levels, reducing speeds is an effective way to improve safety. Selecting the lowest practical target speed creates the safest environment for pedestrians, provides easier access to/from abutting land uses, and eases the transition between modes of travel. Ideally, civic and educational thoroughfares would have a target speed of 25 mph, maximum 30 mph.
Lower speeds also make it easier for drivers to perceive conflicts on the road ahead and react accordingly. Drivers require less time and shorter distances to stop or slow down to avoid conflicts in low-speed environments. Conflicts on the street are numerous along civic and educational thoroughfares due to vehicles entering or exiting the street from adjacent access points; pedestrians (often times school children)unexpectedly entering the traveled way; vehicles stopping to park or pulling out of parking stalls; buses pulling over at a stop or pulling out from a stop; and other vehicles unexpectedly changing lanes in congested conditions.
There is often a misperception that slow speeds result in slower travel times along a given arterial street. The travel time along arterials, however, can only be as fast as the intersections (particularly the signalized intersections) allow. High posted speed limits will do nothing to improve arterial travel time if there is significant delay experienced at the intersections. In fact, slower speeds along an arterial can contribute to improved overall travel times by allowing more time for better progression and coordination between signals.
For vehicles attempting to gain access from adjacent land uses and crossroads onto the respective thoroughfare (or vice versa), identifying an opening in the traffic stream to safely enter, exit, or cross (commonly referred to as gap selection) is of paramount importance. Drivers must be able to accurately assess whether an opening is acceptable in order to safely navigate to and from the arterial. As speed increases, the number of acceptable gaps decreases and it becomes increasingly difficult for drivers to identify safe gaps. Selecting the lowest practical design speed fora corridorwill maximize the ability of drivers to effectively assess gap acceptability, and as a result, safely enter and exit the arterial traffic stream.
Consider Rush Hour Speed Reductions.Most civic and educational places experience rush hour or peak hour pedestrian congestion at the beginning and end of the day when students/employees are arriving or departing.This spike in pedestrian activity increases the conflicts along the thoroughfare.Low speed vehicular traffic is imperative during these times to provide the safest possible environment for all users.Special speed limits for these time periods should be considered as a method of further prioritizing pedestrians, bicyclists, and transit. Clear and visible signing is vitally important when choosing to reduce speeds in this manner.
Support speed transitions with design elements. It is important to consider and plan for any speed transitions that may exist beyond a given area.Appropriate signing, traffic calming measures, and enforcement are essential to ensure safe speed transitions. This is particularly important in civic and educational areas where the posted speed increases significantly outside the school or civic area.
Enforcement is an effective measure, but long-term efforts can be costly. Studies have shown that when enforcement measures are removed, vehicles typically resume higher travel speeds. One measure that has proven effective in Minnesota isthe use ofspeed limit signs in conjunction with radar speed measurement displays (see Driver Speed Awareness PDF). Although they arenot appropriate in all locations,speed measurement displaysare particularly beneficial in areas that are plagued by speeding motorists.
Recent research on the correlation between lane width, speed, and substantive safety suggests that for travel speeds less than or equal to35 mph, there is no difference in substantive safety performance between 10', 11', and 12' lanes. In other words, lane width has little effect on substantive safety in low-speed environments. Becausethese thoroughfaresare designed for speeds at or below 30 mph, narrower lanes should be considered. Narrow lanes encourage lower travel speeds and leave more right-of-way available for the areas beyond the pavementthat may be used forsidewalks, tree plantings, building frontages, etc. Converting a 4-lane section with 12-foot-wide lanes to 10-foot-wide lanes will provide a net gain of 8' in additional right-of-way for other uses. The site-specific characteristics will influence the choice between 10', 11', and 12' lanes inthese areas.
Design for the target speed. Once the target speed is set (and consequently the design speed and posted speed), controlling roadway elements must be carefully designed to support travel at the desired speed. The target speed limit will become meaningless if lane widths, horizontal clearance, median type and width, and other features are inconsistent with the posted speed limit. ITE's Context Sensitive Solutions in Designing Major Urban Thoroughfares for Walkable Communities identifies the following design elements that should be considered when lower speeds are desired:
Minimize intersection curb return radii. The size of the radii for the curb returns at intersections has a direct impact on vehicular travel speed in these areas.
Smaller radii encourage slower speeds. Care should be taken, however, to ensure that school buses and transit buses are accommodated at key locations.
When channelized right turns are chosen, care should be taken to ensure that the geometry of the right turn does not encourage higher speeds.
PDFs:
Links:
Other References: